Tall Princess 2 Column 760mm Cast Iron Radiator

CDC-TALLPRINCESS
mqw_princess_mb_12_b.jpg mqw_princess_mb_6_b.jpg mqw_princess_mb_6_c.jpg mqw_princess_mb_12_c.jpg Variety of Paint Finishes Black Primer Only Linen White Paint Finish Cream White Paint Finish Antique Bronze Paint Finish Gunmetal Grey Paint Finish Matt Black Finish Satin Black Paint Finish mqw_princess_mb_6_b_crop_01.jpg
Sale

£20.00 save 5% per section

£24.00 inc. VAT

10+ in stock

Quantity

Quality Tall Princess/School cast iron radiator taken from an original design. Manufactured using traditional techniques and guaranteed for 10 years.

Height is 760mm from floor to top of radiator.

All radiators supplied fully assembled to maximum widths shown.

Distance from floor to centre of valve inlet/bush is 110mm.

Also available in a short version.

Key Points
  • Stylish design with chunky columns.
  • Simple lines offering timeless elegance.
  • Would enhance both period and contemporary interiors.
  • Two large columns providing great heat output.
  • Fully assembled and ready to fit.
  • Pressure tested to 6 bar/92psi.
  • Guaranteed for 10 years.
  • Integral feet.
  • ½" 15mm BSP connections for main valves.
  • Free bleed valve.
  • Available ready painted in one of six great colours.
  • All cast iron radiators supplied CE Certified to British Standards BS EN 442-1 & BS EN 442-2.

Most recent customer reviews

by Ricky. Newcastle upon Tyn on 28 August 2017

Radiator looks perfect and original. Needed another washer which was sent out using next day delivery. Very pleased and would use again

by Mr P.C. on 1 August 2017

Hello,

I'd just like to share my feedback from my recent order.

I was thoroughly impressed with both the product and the service I received from you guys. When I had technical questions about how to paint the radiators myself, or how to attach a wall stay, you were quick and happy to help me. When I also had a technical problem with one of our radiators, you quickly sent out a replacement part for free and this was really great to see - out of all the suppliers we've used during our house refurb, you've been by far the best to work with, so many thanks for that.

I'll be sure to order from you guys again when we need some more cast iron radiators.

Thanks again,
Peter

by Mrs Clarke on 19 June 2017

Products in personamaxing . Georgous finish (satin black)
Can't wait to install them .

SectionsHeight
(mm)*
Length
(mm)
Depth
(mm)
BTUkWkgPrice
(ex.VAT)
3  76028118515450.4529£60.00
4  76035818520600.6039£80.00
5  76043518525750.7549£100.00
6  76051218530900.9159£120.00
7  76058918536051.0668£140.00
8  76066618541201.2178£160.00
9  76074318546351.3688£180.00
10  76082018551501.5198£200.00
11  76089718556651.66107£220.00
12  76097418561801.81117£240.00
13  760105118566951.96127£260.00
14  760112818572102.11137£280.00
15  760120518577252.26146£300.00

* Height is for foot section from floor to top of radiator.
All lengths approximate and include to bush ends - please allow 4% tolerance.
Price for standard Black Primer finish, other finishes available at extra cost.

Standard finish to all cast iron radiators is a cellulose based BLACK primer.

The lead time from order placed to despatch for all radiator orders will be shown at checkout a. We will obviously ship sooner if order complete.

We can also supply this cast radiator ready painted/top coated in an authentic colour for only £3.75 + VAT per section.

The following exclusive colours are available:

  • Gunmetal Grey
  • Satin Black
  • Linen White
  • Cream White
  • Antique Bronze
  • Matt Black (new option now available)
Click here to request your FREE paint swatch card

As the radiators are hand assembled, all dimensions are approximate. We therefore advise that pipework should only be put in place once the radiator has been delivered.

Bush Ends
All bush ends/caps will only be hand tight to allow customers to interchange if on a gravity fed heating system & will need fitting correctly when installed with PTFE etc.

Accessories & Bleed Valves
All Fittings (Valves, Wall stays, Shrouds etc) ordered will be placed in a bag or box placed on top of the top radiator. Air Vents/bleed valves will be in an SEALED ORANGE BAG with a bright yellow sticker stating 'Bleed Valves Enclosed'.If you are only receiving bleed valves these will be placed in the SEALED ORANGE BAG inside the top radiator. You MUST check it's content upon delivery & report any missing items immediately.

Guarantees & Conditons of Sale etc.
Guarantees & Conditions of Sale - Click Here!

All bush ends/caps for your cast iron radiators will only be hand tight to allow customers to interchange if on a gravity fed heating system and will need fitting correctly when installed.

A common cause of leaks is over tightening of the valve tails into the bush ends of the cast iron radiator. Over tightening will crack the bush. When fitting the valve tail in to the bush turn it finger tight then using a spanner turn it until there is only moderate resistance. Using a 4” spanner it is difficult to over tighten. A thread sealant must be applied to the radiator end caps and to the valve tail threads to get a water tight seal. LSX sealant available at all plumbers’ merchants is recommended. PTFE tape is an acceptable alternative. The torque from an 8” adjustable spanner will be sufficient to create a good seal.

All valves and air vents/bleed valves to be fitted with LSX sealant or PTFE tape.

No caustic/corrosive/acidic plumbing compounds or liquids are to be used on or in any part of our radiators, our valves or connections including aggressive flushing agents. If required, the system should be flushed with clean water only. The water in the system must be neutralised correctly following the use of any compounds etc if required using appropriate crystals or similar. If caustic and/or corrosive compounds (liquid or other) have been introduced into the system resulting in subsequent damage to seals/gaskets, any guarantee offered will be invalid. When a chemical cleanser is used it must be thoroughly flushed from the system. We recommend the use of Fernox F5 for power flushing and F1 rust inhibitor. Unlike other chemicals these products are not acid based and should not affect seals. After treatments the water should be checked for a neutral PH between 7 – 8. System design, flushing and dosing must be in accordance with BS 5449, 1990, BS EN 12828:2003 and BS 7593.

Following this procedure the system must be closed with a sufficient corrosion inhibitor suitable for the water quantity in your system. Dosing tools should be used to ensure the minimum correct levels of inhibitor are present at all times to prevent corrosion and should take into account the particular metals within the system. Appropriate inhibitor should be used in conjunction with manufacturer’s instructions and appropriate quantities must be used for the water content of the system.

We always advise you to wait for your cast iron radiators to be onsite before working out pipe work and pipe centres widths. This is because cast iron is not an exact product and because each radiator is hand assembled there will always be slight discrepancies as indicated on each radiator page in the lengths of same style & size radiators.

However, we appreciate that occasionally some prep work may need to be carried out prior to your order arriving onsite and that approximate pipe centre measurements may be required for first fix purposes.

Therefore, and strictly as a guide only, we would say for the approximate pipe centres for each cast iron radiator to add approx 90mm/3.5” to the overall length shown on the Specification tab. E.g. if the length indicated for a radiator is approximately 950mm then the approximate pipe centres will 1040mm & so on.

For the approximate measurement off the skirting board or wall if no skirting is used to the Pipe Centre we suggest half the depth of the cast iron radiator + 10mm as a minimum.

For the approximate ‘outside valve to outside valve measurement’ (the minimum measurement to be able to operate the valves freely) you should add approx 150mm/6.0” to the length indicated for each radiator in the Specification tab. E.g. if the length indicated for a radiator is 950mm then the approximate measurement from the outside of one valve to the outside of the opposite valve will be 1100mm.

PLEASE REMEMBER THAT THE ABOVE MEASUREMENTS SHOULD BE USED AS A GUIDE ONLY

All radiator pallet deliveries are made to kerb side only or nearest hard standing and are based on a 'Book In & Signed For' service (week days only). You will then be contacted by the delivery company 2-4 working days after despatch to organise delivery direct.

If you require a 'Dedicated Day' (working week day) for delivery to ensure you have help to hand you must indicate this in the message box at checkout. Please note that this may delay delivery slightly. This will still be a kerb side only or nearest hard standing service. For Saturday delivery, there will be an additional charge of £45.00 + vat on top of the standard delivery charge quoted.

Care should be taken when removing radiator(s) from the pallet on delivery. Radiators should be lifted off and NOT dragged/pulled as this will result in paintwork being damaged. When removed from the pallet, all radiators must be carried in an upright position to prevent damaged to joints.

If any items are deemed to be missing from any order, we must be contacted immediately (not longer than 2 days from receipt) via email. Failure to do so will result in additional items supplied being charged to the customer. We cannot be held responsible for any consequential costs incurred due to any shortfalls which have not been notified within the timescales above.

Prices for deliveries will be automatically calculated at checkout. Pallet Delivery Prices & Conditions - Click Here!

Reviews  13  


 Review by:

Radiator looks perfect and original. Needed another washer which was sent out using next day delivery. Very pleased and would use again


 Review by:

Product & Support

Hello,

I'd just like to share my feedback from my recent order.

I was thoroughly impressed with both the product and the service I received from you guys. When I had technical questions about how to paint the radiators myself, or how to attach a wall stay, you were quick and happy to help me. When I also had a technical problem with one of our radiators, you quickly sent out a replacement part for free and this was really great to see - out of all the suppliers we've used during our house refurb, you've been by far the best to work with, so many thanks for that.

I'll be sure to order from you guys again when we need some more cast iron radiators.

Thanks again,
Peter


 Review by:

Excellent product and service

Products in personamaxing . Georgous finish (satin black)
Can't wait to install them .


 Review by:

Recommend

The first radiator had a minor leak and initially they sent out a tool to try to rectify the problem. However this didn't help and without hesitation the company organised a priority replacement. Certainly would recommend the company, excellent product


 Review by:

I've never bought cast iron radiators before...

...I will from now on and from here because the quality of the product, the update information as it was built and the look of it in situ means all in all it's been an excellent purchase. I bought taps and a wall bracket as well and these, too, are excellent.


 Review by:

Beautiful form, excellent function

I have just replaced all 5 radiators in my home with radiators from Cast Iron Radiator Centre. I couldn't be happier with them - the rads themselves are gorgeous, true to original design. The finish is of a very high quality and works beautifully with the colours in my rooms (I have half in the Gunmetal and half in the Antique Bronze). The valves, wall stays, shrouds and base plates complete the look. I am delighted with the change this has made in the way my house looks and feels - and amazed at the heat efficiency against the size. My old radiators (which I inherited when I bought the house) took up more space and gave out less heat.

I'd recommend this company to anyone looking to beautify their home with a bit of warm cast iron.


 Review by:

Bought about 10 of these so far - absolute first class, they look beautiful and complement our home. Price and service A+!


 Review by:

Bought about 10 of these so far - absolute first class, they look beautiful and complement our home. Price and service A+!


 Review by:

Excellent Product

An excellent product, looks fantastic and the colour is stunning (Gun Metal). The advice was really good and the service was brilliant. Will be back in touch for the next project!


 Review by:

Excellent radiators and service

We have just had 2 of these radiators installed and we're extremely pleased with the results. Got good advice when buying and all arrived when they said it would. Very happy to recommend them.


 Review by:

Very pleased

We have just had 2 of these radiators installed and we're extremely pleased with the results. Got good advice when buying and all arrived when they said it would. Very happy to recommend them.


 Review by:

Tall Princess

this is my second purchase of radiators and I am yet again extremely happy with both products and service. Thank you.


 Review by:

Brilliant

Just received my delivery of 2 of the above. They are brilliant (and heavy) - fantastic quality, value for money and finish. They will look great when fitted with the nickel accessories also ordered. Problem is now I need to change the rest of my radiators which look rubbish when compared to these beauties :-) Thank you.


Shop Securely

Contact Us

Cast Iron Radiator Centre
(a Division of Mossmead Ltd)
Ryton Fields Farm, Wolston Lane,
Ryton on Dunsmore
, Coventry
West Midlands, CV8 3ES, UK
0800 294 8603 / 024 7630 3999
sales@castironradiatorcentre.co.uk
Contact Form
Google+ facebook twitter facebook