Traditional Victorian 9 Column 330mm Cast Iron Radiator

£30.00 per section

£36.00 inc. VAT
Calculate BTU

Anticipated despatch in 5 - 7 full working days (from 08/04/2024 to 10/04/2024)

All items sent together. Actual delivery depends on item with greatest lead time.
Quantity

Quality cast iron radiator taken from an original design. Manufactured using traditional techniques and guaranteed for 10 years.

Height is 330mm from floor to top of radiator.

All radiators supplied fully assembled to maximum widths shown.

Distance from floor to centre of valve inlet/bush is 75mm.

Key Points
  • Victorian style design looks great in older properties.
  • Clean, simple lines also enhance contemporary interiors.
  • Traditional nine column design provides excellent heat output.
  • Fully assembled and ready to fit.
  • Pressure tested to 6 bar/87psi.
  • Guaranteed for 10 years.
  • Integral feet.
  • ½" 15mm BSP connections for main valves.
  • Free basic brass bleed valve.
  • Available ready painted in one of six great colours.
  • All cast iron radiators supplied CE Certified to British Standards BS EN 442-1 & BS EN 442-2.
  • Heat outputs are at Delta T50 (ΔT50°C). See FAQ page for correction factors.

For full specification see Specification tab below.


Most recent customer reviews

by Michelle on 25 May 2022

Highly recommended company. Professional, friendly and quality products. These radiators are incredible. Five stars 🌟

by Carmel on 6 January 2022

Ordered 25 radiators valves and stays all delivered without a single hitch to the west coast of Ireland. Product is great (have ordered 3 times before). Ordering is so straight forward and the BTU calculator. Communication excellent as well. All genuine experience

by Neil on 17 December 2021

Excellent customer service and delivery timescales. The Radiator is made to a high standard , we opted for the black primer and followed the fitting and care instructions to the letter. Warms the hallway incredibly quick and retains the heat once the heating is switched off. Excellent product! highly recommended. Thank you.

SectionsHeight
(mm)*
Length
(mm)
Depth
(mm)
Content
(litres)
BTU
@ΔT50
Watts
@ΔT50
kg
10  33060033511.03520103272
14  33082033515.449281444101

* Height is for foot section from floor to top of radiator.
All lengths approximate and include to bush ends - please allow 4% tolerance.

Standard finish to all cast iron radiators is a cellulose based BLACK primer.

The lead time from order placed to despatch for all radiator orders will be shown at checkout. We will obviously ship the order sooner if complete.

We can also supply this cast radiator ready painted/top coated in one of our authentic colours for only £6.00 + VAT per section.

The following exclusive colours are available:

  • Gunmetal Grey
  • Satin Black
  • Cream White
  • Antique Bronze
  • Matt Black

As the radiators are hand assembled, all dimensions are approximate. We therefore advise that pipework should only be put in place once the radiator has been delivered.

Bush Ends
All bush ends/caps will only be hand tight to allow customers to interchange if on a gravity fed heating system & will need fitting correctly when installed with PTFE etc.

Accessories & Bleed Valves
All Fittings (Valves, Wall stays, Shrouds etc) ordered will be placed in a box located on top of the top radiator. Air Vents/bleed valves will be in an SEALED ORANGE BAG inside this bow with a bright yellow sticker stating 'Bleed Valves Enclosed'. You MUST check it's content upon delivery & report any missing items immediately.

Guarantees & Conditons of Sale etc.
Guarantees & Conditions of Sale - Click Here!

Radiator Fitting Guidelines

  • Appropriate dosing tool must be used and water subsequently tested to ensure correct levels of inhibitor are added to match the total water content of your system. This should be recorded for future reference. Failure to do so will invalidate any warranty offered.
  • In addition to the above, it is always important to remember that every time your heating system is drained down for repairs/alterations/decorating etc, Inhibitor will need to be re-introduced again to the correct dosing level.
  • To comply with BS 7593:2019, inhibitor levels should be checked annually and recorded as part of your boiler service. BS 7593:2019 also states that after 5 years systems should either be re-dosed, or a laboratory test performed. Failure to do the above will invalidate your warranty.
  • If you have a sealed/pressurised system, once the correct amount of inhibitor is added to the system, it should remain active for the life span given by the manufacturer or until the system is drained.
  • If you have a vented/open system, you MUST regularly check that the inhibitor in the system is at correct level for your system volume as evaporation may affect levels over time. failure to do so will invaldate your warranty.
  • Lastly, we always recommend that suitable trained/qualified individuals install and maintain your heating system.
  • All bush ends/caps will only be hand tight to allow customers to interchange if on a gravity fed heating system and need fitting correctly when installed.
  • A common cause of leaks is over tightening of the valve tails into the bush ends of the radiator. Over tightening will crack the bush. When fitting the valve tail into the bush, turn it finger tight, then using a spanner turn it until there is only moderate resistance. Using a 4” spanner it is difficult to over tighten. A thread sealant must be applied to the radiator end caps and to the valve tail threads to get a water tight seal. LSX sealant, which is available at most plumbers’ merchants, is recommended. PTFE tape is an acceptable alternative. The torque from an 8” adjustable spanner will be sufficient to create a good seal.
  • All valves and air vents/bleed valves to be fitted with an LSX sealant or PTFE tape.
  • NO caustic/corrosive/acidic plumbing compounds or liquids are to be used on or in any part of our radiators, our valves, or connections including aggressive flushing agents. Failure to not adhere to this will invalidate your guarantee.
  • On commissioning, the water in the system MUST BE cleaned to remove debris, flux & residues. Its should then be tested and if required, neutralised correctly following the use of any compounds etc if required using appropriate crystals or similar.
  • If your system requires flushing, we recommend the use of Fernox F3 followed by the use of F1 rust inhibitor, which unlike other chemicals are not acid based and should not affect seals. After treatments the water should be checked for a neutral PH between 6.5 - 8.5. System design, flushing and dosing must be in accordance with B5449, 1990. BS EN 12828: 2003 and BS 7593:2019.
  • Following this procedure, the system must be closed with a sufficient Corrosive Inhibitor suitable for the water quality in your system. Dosing tools must be used to ensure the minimum correct levels of inhibitor are present at all times to prevent corrosion and should take into account the particular metals within the system.
  • Appropriate inhibitor should be used in conjunction with manufacturer’s instructions and appropriate quantities must be used for the water content of the system. Failure to do so will invalidate your guarantee.
  • The use of water softener in the heating system can cause problems with the gasket seal and will invalidate any guarantee offered.
  • We do not advise using our cast iron radiators with an electrical heating element.

Guarantees & Condition of Sale

Our Cast Iron Radiators are guaranteed for a period of 10 years, Valves for 2 years and all other products (excluding reclaimed products or where specified) for 1 year from the date of the Purchaser’s invoice to be free from any manufacturing defects. The Company will replace any goods found faulty due to manufacturing or workmanship defects, free of charge within this period, subject to the following exceptions:

  • If the defect arises as a result of wilful damage, negligence, misuse, abnormal working conditions, failure due to incorrect installation or failure to follow our instructions;
  • If the buyer alters or repairs such products without our written consent;
  • If the buyer has not paid the Contract price for the Products by the payment date.
  • If the radiator in question has been supplied in parts to be fully assembled on site by the customer or their plumber.

Defective goods will be repaired or replaced subject to the following conditions:

  • The Buyer provides proof of original purchase and written notice of the defect immediately;
  • The company reserves the right to change only the defective part or section of a sectional radiator;
  • Consequential loss - the company is not liable to any consequential loss caused directly or indirectly by any defect in its goods including any costs of labour incurred by the Purchaser;
  • The benefit of this warranty is given to the first retailer purchaser of the goods and is not assignable.

We always advise you to wait for your cast iron radiators to be onsite before working out pipe work and pipe centres widths. This is because cast iron is not an exact product and because each radiator is hand assembled there will always be slight discrepancies as indicated on each radiator page in the lengths of same style & size radiators.

However, we appreciate that occasionally some prep work may need to be carried out prior to your order arriving onsite and that approximate pipe centre measurements may be required for first fix purposes.

Therefore, and strictly as a guide only, we would say for the approximate pipe centres for each cast iron radiator, to add on the approximate measurements listed on the table below to the overall length of the radiator shown on the Specification tab.

Valve Pipe Centre's (measurements taken from end of thread to valve centre)*
Control Lockshield
Shipston 42mm 42mm
Stratford / Loxley Gothic / Arden /
Meriden / Welford Lever Handle
45mm 45mm
Kenilworth / Barford 49mm 49mm
Warwick 54mm 54mm

For the approximate measurement off the skirting board or wall if no skirting is used to the Pipe Centre we suggest half the depth of the cast iron radiator + 10mm as a minimum.

For the approximate ‘outside valve to outside valve measurement’ (the minimum measurement to be able to operate the valves freely) you should add approx 150mm/6.0” to the length indicated for each radiator in the Specification tab, however this measurement will vary depending on the valve that is fitted - this measurement should be used if fitting the radiator and valves into an area where there may be a width restriction.

*PLEASE REMEMBER THAT THE ABOVE MEASUREMENTS SHOULD BE USED AS A GUIDE ONLY.

DELIVERY LEAD TIMES - Lead times to despatch are now shown live on the website and we will always do our utmost to keep to stated times.

All radiator pallet deliveries are made on a 7.5t Lorry (the smallest vehicle we can book) with tail lift to kerb side only or nearest hard standing and are based on a 'Book In & Signed For' All Day service (9.00 a.m. - 6.00 p.m. - Week days only).

Once the order has been booked out for despatch, you will receive status emails periodically from Mobile People Powered Logistics (Mobile PPL), our delivery partner, to confirm receipt of the order, confirmation of the pallet being scanned to a delivery vehicle (with ETA), and then confirmation of delivery completed.

Alternative ‘All Day’ dates will be available at no additional cost to suit.

Upgraded to services such as Next Day delivery, Dedicated Day a.m. or p.m., timed delivery windows and Saturday deliveries where available are available for an additional charge to be paid directly with Mobile PPL nly.

RED ROUTES & RESTRICTIVE PARKING - Please note drivers are unable to park on double yellow or red lines due to the risk of a parking ticket.

ACCESS - Please inform us if there are any access restrictions at your delivery point (such as 7.5T weight restrictions or height restricted bridges).

If you require a 'Dedicated Day' (working week day) for delivery to ensure you have help to hand you must indicate this in the message box at checkout. Please note that this may delay delivery slightly. This will still be a kerb side only or nearest hard standing service. For Saturday delivery, there will be an additional charges on top of the standard delivery charge quoted if this service is available.

We must stress that a Pallet Delivery Service is always kerbside only. The drivers are not insured to assist you with any aspect of moving the goods from the kerbside. This is to remove any potential risk of personal injury or damage to your goods, or your property. We remind you that it is not in your interest to encourage a driver to assist you in any way that falls outside of his responsibility. If, in the event the driver does agree to assist you, we assume you accept full responsibility for any subsequent damage to any person, or property and by doing so you will void any right to make a subsequent Insurance claim.

Care should be taken when removing radiator(s) from the pallet on delivery. Radiators should be lifted off and NOT dragged/pulled as this will result in paintwork being damaged. When removed from the pallet, all radiators must be carried in an upright position to prevent damaged to joints.

If any items are deemed to be missing from any order, we must be contacted immediately (not longer than 2 days from receipt) via email. Failure to do so will result in additional items supplied being charged to the customer. We cannot be held responsible for any consequential costs incurred due to any shortfalls which have not been notified within the timescales above.

Prices for deliveries will be automatically calculated at checkout. Pallet Delivery Prices & Conditions - Click Here!

Radiator Collections

If you are collecting your order, please remember that this can only be done by appointment only between the hours of 9am - 4pm Monday to Friday.

You MUST ensure your vehicle is suitable to take the order safely, you are able to easily load and unload all radiators safely (remember the radiators are very heavy) and that all radiators can be supported and MUST be fully support when laid flat. We will not accept responsibilty for damaged caused subsequent to collection.

Reviews  14  


 Review by:

Incredible quality

Highly recommended company. Professional, friendly and quality products. These radiators are incredible. Five stars 🌟


 Review by:

Brilliant Company

Ordered 25 radiators valves and stays all delivered without a single hitch to the west coast of Ireland. Product is great (have ordered 3 times before). Ordering is so straight forward and the BTU calculator. Communication excellent as well. All genuine experience


 Review by:

Traditional Victorian 9 Column

Excellent customer service and delivery timescales. The Radiator is made to a high standard , we opted for the black primer and followed the fitting and care instructions to the letter. Warms the hallway incredibly quick and retains the heat once the heating is switched off. Excellent product! highly recommended. Thank you.


 Review by:

Very hadnsome

We had two of these made in gunmetal grey - they really look the part, and they pump out heat really well, and keep hot for a good couple of hours after the system has shut off,, proper radiating radiators.


 Review by:

Traditional Victorian

WHAT A FANTASTIC PRODUCT, VERY WELL MADE, LOVELY COLOUR, VERY HEAVY


 Review by:

All the rads in my order are excellent

Very happy with my choice
and very suitable for my farmhouse


 Review by:

Lovely design and great service

I bought those radiators because I wanted to give my flat a lovely vintage touch and it is a total success, those radiators are stunning and are well finished. On top of that, the price is really competitive and hard to beat. The purchase process was simple, with regular updates by text messages and emails. I would definitely recommend.


 Review by:

Top of their game

Found these guys after a few online searches .... initially attracted by the very very keen pricing. I made an inquiry and once communication began I knew that I was going to purchase.
My order was not straightforward and there were several messages between us.

Also I’m ordering from Republic of Ireland and needed delivery to happen in a pretty tight window.

The entire process could not have gone more smoothly..... 100 percent delighted and more than happy to highly recommend this company. Thanks a million. Tim


 Review by:

GREAT RADIATORS

Excellent radiators, at competetive prices, and amazing turnaround / delivery


 Review by:

Fantastic service, great product!

Bought an initial order of 5 rads, so impressed decided to go ahead and buy another 15 plus Valves for the House. Despite the size of the order they hit the target date. They also make use of great logistics firm Pallet Plus where I live) for delivery who were in communication about delivery day and times all the way until they arrived. Great service all the way from start to end.


 Review by:

Great product. Beautifully finished and cast perfectly. Plumbers fitting them very impressed with the quality.


 Review by:

Wee rads for window seats

Really love these products and highly recommended.


 Review by:

9 Column 330mm radiator

Thought this might look too big and industrial, but looks amazing under a little window in my daughter's bedroom. She sits on it and looks out of the window. Perfect. Really helpful service on the phone too.


 Review by:

Beautiful radiators!

Purchased 4 of these as part of a larger order totalling over £7000. They are solid pieces of kit, well made, stylish and rather lovely chose anthracite grey - they will suit our Victorian home perfectly. The Engineers fitting them have also commented on their quality, and also said they were great to fit. An excellent service and by comparison to other quotes for similar product, represent excellent value for money. The Satin Nickel thermostatic Valves are also lovely and look well with these radiators. I am delighted with my purchases from the Cast Iron Radiator company and would recommend them to anyone needing new radiators.


Keep In Touch

Sign up to our mailing list for the latest news, offers and Rad inspiration. You can unsubscribe at any time.

Shop Securely

Contact Us

Cast Iron Radiator Centre
(a Division of Mossmead Ltd)
241 Torrington Avenue
(Corner of Padstow Road)
Coventry, West Midlands
CV4 9AP, UK
0800 294 8603 / 024 7630 3999
sales@castironradiatorcentre.co.uk
Contact Form
facebook twitter instagram facebook Google My Business