Quality cast iron radiator made in the short Ascot style. Manufactured using traditional casting techniques and guaranteed for 10 years.
Height is 510mm from floor to top of radiator.
All radiators supplied fully assembled to maximum widths shown.
Distance from floor to centre of valve inlet/bush is 110mm.Key Points
Very pleased with the service we received whenever we contacted this company and the radiators are of high quality and excellent the paint finish is as requested. We had to change delivery date but this was no trouble, they have been most helpful . We purchased 3 radiators of different sizes and style and very happy. The prices are good and ordering easy.by Debi W on 17 November 2018
I love my little rad, and it sits beautifully below my hallway window. Gives off fantastic heat and makes an average hallway a special one instead.by Claire on 27 September 2018
Once again a lovely radiator with quick delivery.
* Height is for foot section from floor to top of radiator.
† All lengths approximate and include to bush ends - please allow 4% tolerance.
‡ Price for standard Black Primer finish, other finishes available at extra cost.
Standard finish to all cast iron radiators is a cellulose based BLACK primer.
The lead time from order placed to despatch for all radiator orders will be shown at checkout a. We will obviously ship sooner if order complete.
We can also supply this cast radiator ready painted/top coated in an authentic colour for only £4.50 + VAT per section.
The following exclusive colours are available:
As the radiators are hand assembled, all dimensions are approximate. We therefore advise that pipework should only be put in place once the radiator has been delivered.
All bush ends/caps will only be hand tight to allow customers to interchange if on a gravity fed heating system & will need fitting correctly when installed with PTFE etc.
Accessories & Bleed Valves
All Fittings (Valves, Wall stays, Shrouds etc) ordered will be placed in a bag or box placed on top of the top radiator. Air Vents/bleed valves will be in an SEALED ORANGE BAG with a bright yellow sticker stating 'Bleed Valves Enclosed'.If you are only receiving bleed valves these will be placed in the SEALED ORANGE BAG inside the top radiator. You MUST check it's content upon delivery & report any missing items immediately.
Guarantees & Conditons of Sale etc.
Guarantees & Conditions of Sale - Click Here!
All bush ends/caps for your cast iron radiators will only be hand tight to allow customers to interchange if on a gravity fed heating system and will need fitting correctly when installed with PTFE tape.
A common cause of leaks is over tightening of the valve tails into the bush ends of the cast iron radiator. Over tightening will crack the bush. When fitting the valve tail in to the bush turn it finger tight then using a spanner turn it until there is only moderate resistance. Using a 4” spanner it is difficult to over tighten. A thread sealant must be applied to the radiator end caps and to the valve tail threads to get a water tight seal. LSX sealant available at all plumbers’ merchants is recommended. PTFE tape is an acceptable alternative. The torque from an 8” adjustable spanner will be sufficient to create a good seal.
All valves and air vents/bleed valves to be fitted with LSX sealant or PTFE tape.
No caustic/corrosive/acidic plumbing compounds or liquids are to be used on or in any part of our radiators, our valves or connections including aggressive flushing agents. If required, the system should be flushed with clean water only. The water in the system must be neutralised correctly following the use of any compounds etc if required using appropriate crystals or similar. If caustic and/or corrosive compounds (liquid or other) have been introduced into the system resulting in subsequent damage to seals/gaskets, any guarantee offered will be invalid. When a chemical cleanser is used it must be thoroughly flushed from the system. We recommend the use of Fernox F5 for power flushing and F1 rust inhibitor. Unlike other chemicals these products are not acid based and should not affect seals. After treatments the water should be checked for a neutral PH between 7 – 8. System design, flushing and dosing must be in accordance with BS 5449, 1990, BS EN 12828:2003 and BS 7593.
Following this procedure the system must be closed with a sufficient corrosion inhibitor suitable for the water quantity in your system. Dosing tools should be used to ensure the minimum correct levels of inhibitor are present at all times to prevent corrosion and should take into account the particular metals within the system. Appropriate inhibitor should be used in conjunction with manufacturer’s instructions and appropriate quantities must be used for the water content of the system.
We always advise you to wait for your cast iron radiators to be onsite before working out pipe work and pipe centres widths. This is because cast iron is not an exact product and because each radiator is hand assembled there will always be slight discrepancies as indicated on each radiator page in the lengths of same style & size radiators.
However, we appreciate that occasionally some prep work may need to be carried out prior to your order arriving onsite and that approximate pipe centre measurements may be required for first fix purposes.
Therefore, and strictly as a guide only, we would say for the approximate pipe centres for each cast iron radiator to add approx 90mm/3.5” to the overall length shown on the Specification tab. E.g. if the length indicated for a radiator is approximately 950mm then the approximate pipe centres will 1040mm & so on.
For the approximate measurement off the skirting board or wall if no skirting is used to the Pipe Centre we suggest half the depth of the cast iron radiator + 10mm as a minimum.
For the approximate ‘outside valve to outside valve measurement’ (the minimum measurement to be able to operate the valves freely) you should add approx 150mm/6.0” to the length indicated for each radiator in the Specification tab. E.g. if the length indicated for a radiator is 950mm then the approximate measurement from the outside of one valve to the outside of the opposite valve will be 1100mm.
PLEASE REMEMBER THAT THE ABOVE MEASUREMENTS SHOULD BE USED AS A GUIDE ONLY
DELIVERY LEAD TIMES - Lead times may need to be revised periodically without notice to meet demand at busy times, but we will always do our utmost to keep to stated times.
All radiator pallet deliveries are made on a maximun 7.5t Lorry with tail lift to kerb side only or nearest hard standing and are based on a 'Book In & Signed For' All Day service (9.00 a.m. - 5.00 p.m. - Week days only). You will then be contacted by the delivery company directly via SMS text &/or email after despatch to organise delivery with you using the deatils supplied at order.
Alternative ‘All Day’ dates will be available at no additional cost to suit.
Upgraded to services such as Next Day delivery, Dedicated Day a.m. or p.m., timed delivery windows and Saturday deliveries where available are available for an additional charge to be paid .
RED ROUTES & RESTRICTIVE PARKING - Please note drivers are unable to park on double yellow or red lines due to the risk of a parking ticket.
ACCESS - Please inform us if there are any access restrictions at your delivery point (such as 7.5T weight restrictions or height restricted bridges).
If you require a 'Dedicated Day' (working week day) for delivery to ensure you have help to hand you must indicate this in the message box at checkout. Please note that this may delay delivery slightly. This will still be a kerb side only or nearest hard standing service. For Saturday delivery, there will be an additional charges on top of the standard delivery charge quoted if this service is available.
Care should be taken when removing radiator(s) from the pallet on delivery. Radiators should be lifted off and NOT dragged/pulled as this will result in paintwork being damaged. When removed from the pallet, all radiators must be carried in an upright position to prevent damaged to joints.
If any items are deemed to be missing from any order, we must be contacted immediately (not longer than 2 days from receipt) via email. Failure to do so will result in additional items supplied being charged to the customer. We cannot be held responsible for any consequential costs incurred due to any shortfalls which have not been notified within the timescales above.
Prices for deliveries will be automatically calculated at checkout. Pallet Delivery Prices & Conditions - Click Here!
Review by: Wendy
Very pleased with the service we received whenever we contacted this company and the radiators are of high quality and excellent the paint finish is as requested. We had to change delivery date but this was no trouble, they have been most helpful . We purchased 3 radiators of different sizes and style and very happy. The prices are good and ordering easy.
Review by: Debi Wso cute
I love my little rad, and it sits beautifully below my hallway window. Gives off fantastic heat and makes an average hallway a special one instead.
Review by: ClaireVery good as always
Once again a lovely radiator with quick delivery.
Review by: Mike Bale
This is our second cast iron radiator bought from the Cast Iron Radiator Centre, both times the service was brilliant and the radiators both look fabulous.
Review by: Z C Dean Goodwin"Little Gem"
Fantastic quality and the service from start to finish was amazing!
So glad I found this company can't believe their prices & quality of the radiators compared to all the other companies out there.
Review by: BrentFlawless!
I can't believe the quality and price these guys offer, I have several cast iron radiators and bought some more from these guys and from start to delivery was an excellent professional account. I don't really do reviews but this had to be done! You will not be disappointed on any level. Massive thanks and I will be purchasing more in the very near future 😁
Review by: B j owenCast iron radiator
I have just received my cast iron radiator, and am very pleased with both the radiator and the service received.The customer services and radiator were first class.
Review by: HowardAscot Cast Iron Radiator
Fantastic service. Called the workshop when I wasn't sure of my requirements and was talked through the whole process and given some new ideas. Was not talked down to, I'm not a plumber!, and was left feeling that I knew the product and what to expect.
When the radiators arrived, the builder unloaded them and gave me a call to say how impressed he was with them. "They are right on point".
Fantastic service and product, I would recommend them time and time again.
Review by: j broadbentpleasant company to deal with
Very pleased. Match the two I have already, Will buy two more larger ones when the summer comes
Review by: J BennettVery Impressed
This was a great purchase. Much cheaper than anywhere else and the radiator is stunning. Will use again and have no hesitation in recommending.
Review by: MickStunning period radiator
Beautiful addition to any period home. This is the second one we've bought, both lovely finishing touches to room restorations. They actually provide quite a bit of heat as well, so both form and function!
Review by: HelenLove it
I love the elegance and style of the radiator, it warms up fairly quickly and also holds the heat for along time, even though it is not very big it does exactly what I wanted it to do.
Review by: Anonymous
haven't fitted the rad yet but really pleased with the look of it
the customer service we received was faultless website and staff really helpfull
Review by: GeoffAbsolutely Stunning
This radiator looks simple stunning. We have spent a lot of money renovating the particular room this radiator is in, and it is the stand out feature of the room which everyone comments on
Review by: Emma NFShort Ascot
Really pleased with the radiator, will be be back to be buy more for the rest of the house. Good service and prices!