Traditional Victorian 4 Column 760mm Cast Iron Radiator 12 Section MB with Antique Brass Accessories

Traditional Victorian 4 Column 760mm x 12 section Radiator in Matt Black

Supplied with:

• 1x Warwick Antique Brass Thermostatic Valve Set
• 2x Antique Brass Luxury Wall Stay

• 1x Deluxe Antique Brass Bleed Valve

Quality cast iron radiator taken from an original design, manufactured using traditional techniques and guaranteed for 10 years.

All radiators supplied fully assembled to width shown.

Key Points

• Victorian style design looks great in older properties.
• Clean, simple lines also enhance contemporary interiors.
• Traditional four column design provides excellent heat output.
• Fully assembled and ready to fit.
• Radiator height – 760mm from floor to top of radiator
• Floor to centre of valve inlet/bush is approximately 110/115mm
• Pressure tested to 6 bar/87psi.
• Guaranteed for 10 years.
• Integral feet.
• ½” 15mm BSP connections for main valves.
• Available ready painted in Matt Black
• All cast iron radiators supplied CE Certified to British Standards BS EN 442-1 & BS EN 442-2.
• Heat outputs are at Delta T50 (ΔT50°C). See FAQ page for correction factors.

In order to assist and advise our customers, it is important to note, as all our radiators are cast using traditional methods and casting moulds, there will be slight imperfections and fettling marks on our radiators and this is how we have always wanted to supply them.

This is because we are passionate about wanting to supply our cast iron radiators which have the appearance and authenticity of being many many decades old, but with the features and guarantees associated with that of a modern radiator.

An important point to note for some….. The lighter the colour of your radiator the more these slight marks will possibly be noticed due to shadowing etc and the lighter colours such as Cream White are likely to require touching up more often to keep free from accidental scuffs and knocks.

On the other hand, for obvious reasons, the darker the colour, the more forgiving and less likely these marks will be noticed and as such, these are much easier to ensure the always look in ‘Tip Top’ condition.

Please note that all photos displayed are representative only and colours will vary depending on type of paints used (e.g. Metallic, Satin, Matt etc), surrounding lighting and final positioning. In order to see a true representation of your colour choice, please order bush end samples HERE.

Please see Specification tab above for further details.

^† Height is for foot section from floor to top of radiator.
^‡ All lengths approximate and include to bush ends – please allow 4% tolerance.

As the radiators are hand assembled, all dimensions are approximate. We therefore advise that pipework should only be put in place once the radiator has been delivered.

Bush Ends
All bush ends/caps will only be hand tight to allow customers to interchange if on a gravity fed heating system & will need fitting correctly when installed with PTFE etc.

Accessories & Bleed Valves
All Fittings (Valves, Wall stays, Shrouds etc) ordered will be placed in a box located on top of the top radiator. Air Vents/bleed valves will be inside this box, within a SEALED ORANGE BAG stating ‘Bleed Valves Enclosed’, and stapled to the yellow A3 sheet with our Fitting Instructions. You MUST check it’s content upon delivery & report any missing items immediately.

Guarantees & Conditions of Sale etc.
Guarantees & Conditions of Sale – Click Here!

We always recommend that you trust the installation and maintenance process to an appropriately trained and qualified professional. Head to our trade directory to find a cast iron radiator installation professional near you. 

Failure to follow our radiator installation guidelines could void your warranty.

View cast iron radiator fitting guidelines

We always advise you to wait for your cast iron radiators to be onsite before working out pipe work and pipe centres widths. This is because cast iron is not an exact product and because each radiator is hand assembled there will always be slight discrepancies as indicated on each radiator page in the lengths of same style & size radiators.

However, we appreciate that occasionally some prep work may need to be carried out prior to your order arriving onsite and that approximate pipe centre measurements may be required for first fix purposes.

In this instance, please refer to the technical drawing/specification document, saved as a PDF on each individual valve type, for the measurement from the thread on the valve tail to the centre point of the valve, and add this to the length of your radiator to work out your approximate pipe centre measurement.

For example, if fitting one of our Kenilworth Thermostatic Valve Sets, which has a measurement of 45mm from thread on the valve tail to the centre point of the valve, to a 10 section, Traditional Victorian radiator at 650mm wide, the approximate pipe centre measurement would be 740mm.

For the approximate measurement off the skirting board or wall if no skirting is used to the pipe centre we suggest half the depth of the cast iron radiator + 10mm as a minimum.

For the approximate ‘outside valve to outside valve measurement’ (the minimum measurement to be able to operate the valves freely) you should add approx. 150mm/6.0” to the length indicated for each radiator in the Specification tab, however this measurement will vary depending on the valve that is fitted – this measurement should be used if fitting the radiator and valves into an area where there may be a width restriction.

^*PLEASE REMEMBER THAT THE ABOVE MEASUREMENTS SHOULD BE USED AS A GUIDE ONLY.

Once you’ve made your selection, we will get to work assembling and painting your radiators. We’ll then carefully secure your package to ensure they arrive in perfect condition.

Our delivery partner will keep you informed on the status of your order. You will receive email and SMS updates confirming the date and estimated time of delivery.

Please note, all radiators are delivered on pallets to keep them secure. Delivery is to kerbside only, and you will be responsible for safely moving the radiators indoors. Read our radiator lifting guidelines before ordering.

If you have access restrictions at your delivery point, get in touch with our team before ordering to avoid any delays.

Collection is available by appointment only between the hours of 9am and 4pm, Monday to Friday. Contact us before ordering if you would like to collect.